Kitech Kites - Free RS v2

The FREE RS V2 is a versatile kite with high performance and enjoyable flying characteristics.
The second version has been improved in all essential features. No matter what surface or gear you choose the FRS V2 will put a big smile on your face! Kitesurf, kitefoil, snowkite, landboard or kitebuggy? Higher top speed, bigger and longer jumps and soft landings await! FRS V2 - we totally redesigned the kite to be even more fun!

NEW PROFILES
The jump height and hang time significantly increased. The landing is soft and easy.

NEW SAIL TENSION
The kites are stiffer,filling with air is faster and the kites go upwind significantly better

NEW DIAGONAL RIB SYSTEM
Simplified system, less weight.

NEW OPTIMIZED BRIDAL SYSTEM
Significantly less overall bridal lines-reduced drag and resistance. The kites are flying faster and sharper on the reach and gain several degrees on upwind tacks

NEW PLASTIC BATTENS TO ENSURE DEFORMATION-FREE LEADING EDGE
Fast air filling, and a smooth- running kite in all directions of travel. The more rigid leading edge also increases the power and the performance of the kite including its jumping properties

NEW INTERNAL BAND SYSTEM
Increased structural rigidity, less weight and faster turns.

NEW PULLEY SYSTEM
Simpler design using lighter pulleys. Fully adjustable for the best long term flying behaviors

TWINTIP – ALLROUND - FOIL SETUP
New tunable break lines! Thanks to the adjustable design of the brake line, you can choose between freight train like harder pulling power for twintip, and the softer hydrofoil optimized settingfor higher flight speeds. The all-round setting is an optimum that provides a great choice in all areas of use

NEW BACKPACK
The new impregnated, light, soft materialmeans lower weight and size, which is an advantage in terms of weight and package size when traveling by plane

NEW BAR BAG
Impregnated material, ventilated design. Protects the bar and the kite from moisture. The backpack has its separate pocket for holding the bar

NEW QUICK RELEASE
Increases security, easy handling, unlocking or assembly. You can choose between several sizes. We even added a rope slider design for wave riders and hydrofoilers

SCOPE OF DELIVERY

FRS v2 Kite only

High Tech Kite Bag

Compression Strap

2 Sandbags

Repair Kit

Kitech Keyholder

EUROPEAN PRODUCT
We are extremely proud of the fact that Kitech Kites is one of the few brands that manufactures its kites right here in the heart of Europe! Kitech Kites are 100% made here in the highest quality.

HIGH-QUALITY, ULTRA LIGHT MATERIALS
Since 2002, we have been manufacturing Kitech Kites using the highest quality raw materials available. The use of UL materials improves filling up of the kite with air during launch, makes the canopy more dynamic, faster and more maneuverable even in the smallest breeze!

OPTIMIZED VALVES
The new position provides faster filling and higher internal pressure, resulting in a stiffer dome. The redesigned shape also protects against inadvertent water inflow.

INTERNAL STIFFENING RODS
One of the new features of the V2 are light, flexible plastic rods that support the profile of the leading edge making it stiffer and constant in various conditions, which greatly improves the performance of the kite.

INTERNAL DIAGONAL RIBS AND TAPE SYSTEM
The longitudinal tape system and the optimized diagonal ribs together stiffen the wing and ensure the proper load distribution of the upper and lower kite surfaces, and supporting the accuracy of the original profile.

COVERED DYNEEMA LINES
High-quality, low-stretch dyneema lines from market-leading manufacturers, used in an intelligent mix everywhere. These reduce air resistance and result in a permanently accurate trim, which ensures the long-term flawless operation of the kite. Due to the cover, the cord is less fragile, does not shrink and is not prone to looping.

DOUBLE PULLEY SYSTEM
On the adjustable mixer system, we use smaller bearings-free Ronstan pulleys, which are less sensitive to sand.

WATER OUTLET SYSTEM AND VALVE
Thanks to our specially designed rib system, kites quickly release water when necessary through the water outlet valves on the wing tip.

VELCRO RELEASE VALVES
The 2 Velcro release valves on the trailing edge ensure quick and efficient release of air and with that making unpacking of the V2 a breeze.

INDIVIDUALLY DEVELOPED KITE SIZES
Each size was designed and manufactured to achieve similar flight characteristics and handling.

SAFE AND FOOLPROOF LINE CONNECTIONS
The pigtails and the attachments on the kites only allow correct assembly. In addition, it is easy to compensate for changing line length by using pigtails.

TECHNICAL BACKPACK
The backpack made of new material is lighter, takes up less space and has a water-repellent coating. With external bar holder, practical pockets and adjustable shoulder straps.

FACTORY-QUALITY REPAIR
In our Europe-based manufacturing plant, we can carry out all necessary repairs in factory quality with original materials and solutions! Dome repair, rib, band or panel replacement, repair of cord damage, trimming, and inspection are all handled in-house.

THE BAR (control system)

Easy-to-use system, clean design

Light bar

Ergonomic design

EVA grip

Stainless steel middle part

Soft bar ends with elastic line fastening

Liros Dyneema depower line with high wear resistance

Liros Dyneema flying line 350/250 kg mix for lower air resistance and constant length

Stainless Slider

Clam Cleat Trimmer with Velcro handle

New QR

Rotating head, Anti-twist safety cord

Three available Loop sizes

Also available in Rope Slider version

Qucik Release

KITECH BACKPACK

Technical backpack with lot of storage place and practical pockets

Water repellent fabric

Foam padded shoulder straps

Adjustable webbing lenghts with quality plastic buckles

Chest strap

Soft, lightweight materials

Heavy duty zipper

Screen printed design on the front

Embroided Kitech logo on the front pocket

Info card and holder on the rear

Kitech zip labels

Outer side pocket for the wet control bar

Stronger material on the bottom side